[encblue]

0

I've been basically trying to un brick my dm800 clone sim 2.10 by every means possible (without success).

Last throw of the dice was to try Opti Flashwer, i get through flashing image phase 1 ok (go's to 100%), when it go's to phase 2, nothing happens, it just seems to stop responding :-(

I've left it for more than 2 hours on phase 2 with no response...

Any suggestions?

[fairbird]

0

1-open box
2-remove sim carefully
3-replace it again and make sure in correct place
4-use optiflasher and follow (3-Fix Bad Sector "Sectors Recovery")
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[fairbird]

0

Closed Not Followed ...