[paperbag76]

0

Hi,

My dreambox spec : dm800se clone, sim2.1 , image pli2.1.i having some problem after using flash opti ver2. Usually when I boot my dreambox , I can see the LCD screen showing dchp . After flashing image using flash opti , my LCD show my ip address and that ip address not accurate. When I can't flash using that ip . Please help me.

Yours sincerely,

Newbie paperbag76

[fairbird]

0

Try to flash image again by use "Null modem cable with Network lan" if not successfully use "Null modem cable only without Network lan"..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
But before that check box Network is it DCHP on or off?
Menu--setup--system--network--Adapter settings--Use DHCP=yes

[paperbag76]

0

Hi master ,

Thank for your reply.

Dm800se don't have null modem port. Do you mean using eservice port (mini USB ) to communicate with the pc and the dreambox ?I have tick the dchp setting in the network/ adaptor setting. When I reboot , the LCD show only show the ip address .

[fairbird]

0

Yes i mean "mini usb cable"...Try to flash box as i mentioned in previous replay..

[paperbag76]

0

Yes i mean "mini usb cable"...Try to flash box as i mentioned in previous replay..

Dear Fairbird,

Thanks for your advise.

I did the following step you told me. It seem not working. When i boot up , the dchp is not shown on the LCD of the dm800se.
please help.

Best regards

Paperbag76

[fairbird]

0

No need to DHCP option to flash image by mini usb only by using "Advanced 2"..
Try to use optiflasher and if you get any problem take picture from optiflasher and upload here..

[fairbird]

0

Thread closed....No follow of the issue