[gielvandiek123]

0

I have tried NCF-SIM2-v2.5 but it hangs on finalizing job phase2 please wait.
Is there someone here white a solution
I have already removed sim and put it back in
Dm800 se sim2.1
Greetz Giel

[dontno]

0

Hi, Have a original dm800 flashed with a wrong image. Get now the no ca found message together with a sim201 team #84B message and in the background [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]. Nothing more can not connect in flas or serial mode. Any help would be appriciated.
Thanks

[gielvandiek123]

0

Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !

Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...


I have try it in all bootloaders.

Also i have try it with another sim card, but nothing will work.

The simcard will work well in another dreambox.
Grz. Giel

[20habib]

0

Dreambox 800HD PVR Sim2.1 No Ca Foundالرجاء المساعدة

[gielvandiek123]

0

Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !

Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...


I have try it in all bootloaders.

Also i have try it with another sim card, but nothing will work.

The simcard will work well in another dreambox.
Grz. Giel

DM800 SE SIM2 edition work with SIM2.10 not SIM2.1 !
Check your sim type exactly please because the loader is diffrent
and will work only with sim 2.10 .

Hi!

I have checked the sim card and it's a 2.10

I think the box is broken

Grz. Giel

[gielvandiek123]

0

Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !

Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...


I have try it in all bootloaders.

Also i have try it with another sim card, but nothing will work.

The simcard will work well in another dreambox.
Grz. Giel

i have tried everything also other sim.
Sim works fine in another box.
i really think the box is broken.
Grz. Giel

[twinsoris]

0

Thanks for your support after downloading the NCF V2.1 and decompresse and i am starting by using R232 cable to my computer and my DM800 HD within some seconds the job well done and receiver is to normal with Nabilosat blackhole V.0 .12
Enigma : D 2009 .10
Tuner A: Alps BSBE-2 (DVB-S2)
i hope this is an old image and my dreambox Bootloader is #82 , please what is the next step forward......Thanks more grease to your elbows.

[f_dyego]

0

I have tried NCF-SIM2-v2.5 but it hangs on finalizing job phase2 please wait.
Is there someone here white a solution
I have already removed sim and put it back in
Dm800 se sim2.1
Greetz Giel

dear friends I have a dreambox 800 with sim1.0, installed a wrong image, and gave the error in ca found sim2.01 tried to communicate with rs232 crashes and help me, I'm from Brazil.

[poul_r]

0

Operation Start at: 10:38:23
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 1EB3DAE0
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
NO CA FOUND Repaired Successfully !
Operation Done at: 10:39:48

I hawe big trouble, after power off/on i still get message no ca found??
the card inside the box i white, and inscriptions is
WT00
6990

i think its not a' sim 2card?.
can you help mee

[poul_r]

0

-DM800HD
-Clone
-SIM??? (do not know only written on simm WT00 6990 )
-No Ca Found After Flash image
it dosent mather whatever i doo try to flash wit all the ssxxx, i still
got message no ca found, or not sim2xx. so if anyone know something i will presiate to become knowing!.