+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Dreambox NO CA FOUND (/showthread.php?tid=427)
Pages:
1
2
Dreambox NO CA FOUND - gielvandiek123 - 02-19-2012
I have tried NCF-SIM2-v2.5 but it hangs on finalizing job phase2 please wait.
Is there someone here white a solution
I have already removed sim and put it back in
Dm800 se sim2.1
Greetz Giel
RE: Dreambox NO CA FOUND - dontno - 02-19-2012
Hi, Have a original dm800 flashed with a wrong image. Get now the no ca found message together with a sim201 team #84B message and in the background . Nothing more can not connect in flas or serial mode. Any help would be appriciated.
Thanks
RE: Dreambox NO CA FOUND - gielvandiek123 - 02-23-2012
(02-19-2012, 03:10 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !
Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
I have try it in all bootloaders.
Also i have try it with another sim card, but nothing will work.
The simcard will work well in another dreambox.
Grz. Giel
RE: Dreambox NO CA FOUND - 20habib - 02-24-2012
Dreambox 800HD PVR Sim2.1 No Ca Foundالرجاء المساعدة
RE: Dreambox NO CA FOUND - gielvandiek123 - 02-24-2012
(02-23-2012, 09:42 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.(02-23-2012, 09:35 PM)gielvandiek123 Wrote: You are not allowed to view links. Register or Login to view.(02-19-2012, 03:10 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !
Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
I have try it in all bootloaders.
Also i have try it with another sim card, but nothing will work.
The simcard will work well in another dreambox.
Grz. Giel
DM800 SE SIM2 edition work with SIM2.10 not SIM2.1 !
Check your sim type exactly please because the loader is diffrent
and will work only with sim 2.10 .
Hi!
I have checked the sim card and it's a 2.10
I think the box is broken
Grz. Giel
RE: Dreambox NO CA FOUND - gielvandiek123 - 02-29-2012
(02-23-2012, 09:35 PM)gielvandiek123 Wrote: You are not allowed to view links. Register or Login to view.(02-19-2012, 03:10 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Connect mini usb cable + RG45 network cable both together & try again !
And post the log from NCF tool !
Power ON DB Device [ESC to Abort]
Operation Start at: 21:30:59
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
I have try it in all bootloaders.
Also i have try it with another sim card, but nothing will work.
The simcard will work well in another dreambox.
Grz. Giel
i have tried everything also other sim.
Sim works fine in another box.
i really think the box is broken.
Grz. Giel
RE: Dreambox NO CA FOUND - twinsoris - 03-03-2012
Thanks for your support after downloading the NCF V2.1 and decompresse and i am starting by using R232 cable to my computer and my DM800 HD within some seconds the job well done and receiver is to normal with Nabilosat blackhole V.0 .12
Enigma : D 2009 .10
Tuner A: Alps BSBE-2 (DVB-S2)
i hope this is an old image and my dreambox Bootloader is #82 , please what is the next step forward......Thanks more grease to your elbows.
RE: Dreambox NO CA FOUND - f_dyego - 03-08-2012
(02-19-2012, 01:58 PM)gielvandiek123 Wrote: You are not allowed to view links. Register or Login to view.I have tried NCF-SIM2-v2.5 but it hangs on finalizing job phase2 please wait.
Is there someone here white a solution
I have already removed sim and put it back in
Dm800 se sim2.1
Greetz Giel
dear friends I have a dreambox 800 with sim1.0, installed a wrong image, and gave the error in ca found sim2.01 tried to communicate with rs232 crashes and help me, I'm from Brazil.
RE: Dreambox NO CA FOUND - poul_r - 04-19-2012
Operation Start at: 10:38:23
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 1EB3DAE0
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
NO CA FOUND Repaired Successfully !
Operation Done at: 10:39:48
I hawe big trouble, after power off/on i still get message no ca found??
the card inside the box i white, and inscriptions is
WT00
6990
i think its not a' sim 2card?.
can you help mee
RE: Dreambox NO CA FOUND - poul_r - 04-19-2012
(04-19-2012, 10:53 AM)YASSINOV Wrote:
-DM800HD
-Clone
-SIM??? (do not know only written on simm WT00 6990 )
-No Ca Found After Flash image
it dosent mather whatever i doo try to flash wit all the ssxxx, i still
got message no ca found, or not sim2xx. so if anyone know something i will presiate to become knowing!.