[fairbird]

0

Only "error" with out any things else ?
Any way try to open box remove sim, clean it, replace it again and make sure in correct area..and turn switch box on..

[francomat]

0

Hi
I clean the sim and
Now the Led is off and is off the screen.
I can access only with HyperTerminal :

"© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)"

Regards

[fairbird]

0

make sure you was replaced sim in correct area .... then try to flash box with new image by optiflasher advanced2

[fairbird]

0

Closed...Not followed