What to try again - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: What to try again (/showthread.php?tid=1346) Pages:
1
2
|
What to try again - francomat - 01-02-2013 Dreambox DM800 HD Clone Sim 2.1 No Ca Found After Flash image When power on the box the red led flashes. With DreamUp is impossible to flash via serial, only via web. Via web i have access at page but all upload are are useless. With a friend with an older version of optiflasher With hyperterminal: "© 2007,2008 Dream Multimedia GmbH. All rights reserved. Dreambox DM800 FIRST STAGE 1.00 {BE3E3E3E3E3} Second stage loader wasn't found. Don't panic - it's not a (real) problem. You don't need to repair your Dreambox. It just means that the flashrom with the graphical menu was erased. You can restore this with a tool like DreamUp with serial access. RESCUE{012} MICRO2ND OK, build #56 (20080115)" How I can do? Thank's a lot RE: What to try again - fairbird - 01-03-2013 First try to download last version for optiflasher.. Second go to this thread and follow this: 1-use " 1-Null modem cable only without Network lan." and then select Repair "No Ca Found" and choose "Dm800-sim2.01-SSl84b" and continue. 2-After turn off and on box use "Flashing by Network lan only" to flash new image "make sure right one for your sim.. RE: What to try again - francomat - 01-03-2013 (01-03-2013, 05:59 AM)fairbird Wrote:Any result after 1-use " 1-Null modem cable only without Network lan." and then select Repair "No Ca Found" and choose "Dm800-sim2.01-SSl84b" and continue. The red stop to flash. I have turned off and on the box and when I try to connect with Optiflasher with IP adress: "Socket error # 10060 Connection timed out" and the red light flashes!!! RE: What to try again - francomat - 01-03-2013 (01-03-2013, 07:03 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Did you tryed Advanced Mode 2 ?Ofcourse RE: What to try again - fairbird - 01-04-2013 Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found" RE: What to try again - francomat - 01-04-2013 (01-04-2013, 12:40 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found" I have tried, but nothing. I have send gemini2-470-dm800-201002090910 from serial too but nothing RE: What to try again - fairbird - 01-04-2013 Exactly, nothing what? optiflasher finished or doesn't worked or what ...please take picture and upload it here... RE: What to try again - francomat - 01-05-2013 (01-04-2013, 09:27 PM)francomat Wrote: You are not allowed to view links. Register or Login to view.(01-04-2013, 12:40 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found" After Fix bad sector [attachment=318] after Write Image [attachment=319] And when power on the red led flash! RE: What to try again - fairbird - 01-05-2013 What do you see on the front screen "No ca Found" or another things? RE: What to try again - francomat - 01-05-2013 (01-05-2013, 07:03 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.What do you see on the front screen "No ca Found" or another things? In the front screen there is "error". |