0
Hi
I have got problem so make my DM800 Clone sim 2.01 to boot.
I used Gemini (patched) before with SL 76D, but after some plugin/addon instalations then something happend. It did not boot anymore and a message telling me that it was a SW issue came up on the screen. Then i decided to try reprogramming the box via HTTP. After that i got Err01:NO CA FOUND.
Now i have tried to reflash it with both DREAM UP and Optiflasher.
When selecting Repair NO CA found in optiflasher, it takes a huge time until it´s 100%. About 24 h.. but still no difference.
Below is a printout from my hyperterminal
---------------------------------------
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #76 (20100419)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
---------------------
I have a Null modem cable wich i have used with my DM500 before working well.
Does anyone in this forum know what´s wrong, and if there is anything i can do to make my DM800 Clone live again?
Thank you in advance
/Sotarn
I have got problem so make my DM800 Clone sim 2.01 to boot.
I used Gemini (patched) before with SL 76D, but after some plugin/addon instalations then something happend. It did not boot anymore and a message telling me that it was a SW issue came up on the screen. Then i decided to try reprogramming the box via HTTP. After that i got Err01:NO CA FOUND.
Now i have tried to reflash it with both DREAM UP and Optiflasher.
When selecting Repair NO CA found in optiflasher, it takes a huge time until it´s 100%. About 24 h.. but still no difference.
Below is a printout from my hyperterminal
---------------------------------------
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #76 (20100419)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
---------------------
I have a Null modem cable wich i have used with my DM500 before working well.
Does anyone in this forum know what´s wrong, and if there is anything i can do to make my DM800 Clone live again?
Thank you in advance
/Sotarn