[Josi]

0

Hi

I have problems with my clone Dm800se with A8P cards. The first shows the bios no ca found late after 10 sec. err01 no ca found.
Have read and found readings but nothing that has helped me.
Have Optiflasher pro registered and have not gotten it to work.
The best results I've had e with NCF SIM2 v3.
There I ip 192.168.1.77 and can enter at http to upgrade the software but then when I press flash, nothing happens.

Has anyone had the same problem

Regards
Josi

[Josi]

0

No one who knows and can help me with this problem.
When I use optiflasher I choose the advanced and LD2 and Repair ( no ca Found ) and then Do Job.
When the process is completed at optiflasher writes "Boot success Ready for Network web interface.
It also opens new window and there it says: Enter Ip shown ON *** STOP-Mode ***
But on the Dreambox is ERR1 NO CA Found.

What I'm doing wrong

---

If I use NCF repair SIM2 v3 then I get error message.
error
Can not Process Authorization Please Check:
-Network RJ45 Cable
-Network Domain 192.168.1.x

RJ45 cable is ok i have checked the

[pazitush]

0

Please make sure your TCP/IP cfg allows the range of the requested IP- ip 192.168.1.77....

[Josi]

0

Hi
I will not go into the box besides the http, but in http, I can not update the software because it says it is wrong imige.

Works to try to Jtag.

[prav.tapi]

0

Hi, I have exactly the same issue and am stuck at same step. Please can someone let me know the solution/workaround?

Hi

I have problems with my clone Dm800se with A8P cards. The first shows the bios no ca found late after 10 sec. err01 no ca found.
Have read and found readings but nothing that has helped me.
Have Optiflasher pro registered and have not gotten it to work.
The best results I've had e with NCF SIM2 v3.
There I ip 192.168.1.77 and can enter at http to upgrade the software but then when I press flash, nothing happens.

Has anyone had the same problem

Regards
Josi

[fairbird]

0

@prav.tapi
please make new topic and read this topic first
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[majid3770]

0

Hi
Apparently the post related to the software registry is not available.
How to apply for a new registry? Thanks

[larsonbis]

0

Hello,

I've got the same problem with my DM800se A8p, Err1: no ca found after bad image flash.

I try optiflash but no result, LD2 is with registration impossible to get itn any solution ?

Thanks