05-15-2015, 05:05 PM
(This post was last modified: 05-15-2015, 05:14 PM by machiavel44.)
0
Hello
My Hyperterminal message
FIRST STAGE 1.2/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
Mini-FlashUp, build #88 (2014-02-20)
0.000 - BCM board setup
0.002 - fp init
0.002 - ca init
atr is too short
atr is too short
atr is too short
atr is too short
atr is too short
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: *In BIOS NO CA FOUND
1.387 oled: string too long: '*In BIOS NO CA FOUND'
I have try to flash with dreamup 1.3.3.11 but it stop when " Waiting for aknowledge " and the message on the oled change into " R01 : NO CA FOUND"
Thx for your help.
Bye
My Hyperterminal message
FIRST STAGE 1.2/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
Mini-FlashUp, build #88 (2014-02-20)
0.000 - BCM board setup
0.002 - fp init
0.002 - ca init
atr is too short
atr is too short
atr is too short
atr is too short
atr is too short
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: *In BIOS NO CA FOUND
1.387 oled: string too long: '*In BIOS NO CA FOUND'
I have try to flash with dreamup 1.3.3.11 but it stop when " Waiting for aknowledge " and the message on the oled change into " R01 : NO CA FOUND"
Thx for your help.
Bye
