I have an original DM800HD and I mistakenly tried to flash it with a clone image. I now get *err: no sim2xx FOUND
It seems that I have no IP connectivity
Thank you in advance
Yes but how, does your program use serial port instead of only ethernet?
Is this the pinout for the cable I need?
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Thanks for the job
have a question ! i can not change the boot Logo !!!
i load image with 1280x720 then i click on "Apply" and "Build Bootlogo" but it stops at 40% or some times at[/u] 80% and nothing change !!!!
please Help
Use 1280/720 JPEG type ".jpg" , for PNG & BMP they will be supported soon !
Except this should work normal without problem .
[/quote]
I'm using 1280x720 jpg !!! tryed one more time it stops at 80% again !!
greeting
The program is very good and praise
How can I register that it can be used for bootlogo?
Thank you!!!!!!
I fix this error !!!!
Happy New Year!!!!!!!
graet job from great man ,thanks mr yassin for this great programe
Hello,
i have a big problem with my original drreambox !
I flashed my dreambox with an sim2 flashfirmware ->
And now : i have an error : NO CA FOUND ...
Can you help mee ? You speak in this thread to add a function to restore box for original user ...
I try NCF but i have an error :
Power ON DB Device [ESC to Abort]
Operation Started at: 17:09:38
Wrong Boot Response!
and telnet box :
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.01(0x133/high) {BO23456}
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
0.002 - fp init
0.003 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
Thank's for your Help.
P.S :
HW ID: [0D0A28632920323030372C3230303820447265616D204D756C 74696D6564696120476D62482E20416C6C2072696768747320 72657365727665642E0D0A0D447265616D626F782044004D38 30300D]
It's possible to fix this with the new version on my original version ?
I must use LD2 tools if i register ?
Thank's in advance :)
(12-25-2011, 07:02 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Hi
For original DM800 you need to select "LD2" to bypass loader & this need
Optiflasher registred key , after that you can use this option to boot
& repair your box !
regards , yassinov
ok i'm going to register soon as possible ! Thank's for your quick response ...