[satman5]

0

Hi I updated bootloader in from 80 to 84 then I flashed with image which hung at 7% so I turned off box and now I get RO1 No CA FOUND,
I have OptiFlasher Pro which I got for a another Clone box but not sure how to use it for this

[fairbird]

0

If you sure you have Genuine box then try to flash image again ..
but in this situation you must be to use both cable to gather (mini usb + lan)

And also see this video...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[satman5]

0

Thank you fairbird for your reply I am right now using NCF repair tool and it did connect com port 3 and is now finalising Job Pase 2 fingers crossed
I don't have that button mini Flashup in this box

---

---

Well it didn't work even though NFC Repair tool said it was a success, strange since an IP address was on display during repair process, any suggestions ?

[satman5]

0

Box sorted need Lan & Mini USB cable, used Dreamup V 1.3.3.11 from Dream Multimedia site untick use network -> connect use correct com port, when done flash box with latest DM 800SE Original Firmware image from Dream Multimedia -> Flash and wait,
Now Box is ready for Flashing new Image again

[fairbird]

0

so..
Did you Solved your problem?

[satman5]

0

Oh yes problem solved now running an OpenPLI Image, thank you for your help fairbird

[fairbird]

0

Closed Under Solved