05-14-2014, 02:57 PM
0
Hi,
I have dm800 clone with a defective sim2.01 so I bought a A8P sim.
Now I try to get the box working again.
I used serial cable, LD2 loader and tried to flash a original SSL84 into the box but nothing happens after selecting the right .nfi file.
onlything I get is:
--
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-dm800-84.nfi
FSize: 149488 bytes
--
But flashing doens't happen after selecting the NFI. I immediatly get "do job" again as if it's ready.
When I select the LD1 loader it starts flashing nicely, but after restart I get errror: no CA found
help/suggestion is welcome
cheers
roger
I have dm800 clone with a defective sim2.01 so I bought a A8P sim.
Now I try to get the box working again.
I used serial cable, LD2 loader and tried to flash a original SSL84 into the box but nothing happens after selecting the right .nfi file.
onlything I get is:
--
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-dm800-84.nfi
FSize: 149488 bytes
--
But flashing doens't happen after selecting the NFI. I immediatly get "do job" again as if it's ready.
When I select the LD1 loader it starts flashing nicely, but after restart I get errror: no CA found
help/suggestion is welcome
cheers
roger