[schumibill]

0

Hello


Thank you for the licence key and for the fast replay.
but i have a problem with the soft when i tray to use boot logo builder
i have dm800 hd se i'm using lan conection to the receiver but when i go to boot logo builer 'do job' is out of use i cant click on it
any idea of this issue?

Thaks

[schumibill]

0

Hello


Thank you for the licence key and for the fast replay.
but i have a problem with the soft when i tray to use boot logo builder
i have dm800 hd se i'm using lan conection to the receiver but when i go to boot logo builer 'do job' is out of use i cant click on it
any idea of this issue?

Thaks

Hi
Extra Tools module will be active only after connect with IP & password from main interface !

Thanks for Yassinov for the good support

So the issue was on my webinterface pluging. To use boot logo builder, optiflasher must find the box in TV mode. So when you click connect the log on the main screen should show

Dreambox Found in Tv Mode
Connection Ok!

Here is link for patched webinterface for DM800 se Sim 2.10
to put in /usr/lib/enigma2/python/Plugins/Extensions

  WebInterface_1.7.1_patched.zip (Size: 605.87 KB / Downloads: 47)
good luck

[acorab]

0

Hi,
I have proble with flasing DM800
i'm using lan conection to the receiver
and nullmodem cable.
for flasing ower one hour and still work,Normal?


Name: DOMICA 9a-dm800-sim2-ssl84b.nfi
FSize: 52448416 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !

[acorab]

0

All normal,change image...from GP3 to DOMICA

---

still working!!!

[acorab]

0

Just lan mode and same problem,
with Dream UP and Null modem OK just 1 hour cca for flashing.

after 20 min...Name: TSimage-dm800-1-0-0-20120228.Sim2.01.84.b.riyad66.nfi
FSize: 53784256 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !

---

First fase from 0% to 100% past then stop
Please Wait ! Do not Disconnect Until Done/Reboot !

[kopst00t]

0

hello yassinov, i did something wrong with my dreambox dm800 hd pvt, and got in the no ca error.Now i am left with another error: sim2xx not found.I am trying to use your software but i can't connect and also the option fix ca error i cannot choose.I have a rs232 cable and a internet connection.Can you pls help me?


EDIT I FIXED THE SIM2XX ERROR , IM STILL STUCK WITH THE NO CA ERROR.

[kopst00t]

0

the box is a dm800hd pvr and i don't know if its a clone or genuine, also i don't know how to find what sim it has.can you please tell me how to find out, and i will post it here, thanks...


edit: i opened up dreambox , there is a white card with a sim in it, but there is no sim code written on it.

[fairbird]

0

@kopst00t

Mate...see what YASSINOV told you..

And open a new post without continue here

Please do it if you want help..and take two pictures from two sides for your sim and put it in new post

[parni]

0

thank

[camane007]

0

Hi mate

As a newbie i have to ask you if i can use this software to my original DM800HD PRV ...?

Thanks in advance
camane007