[waqas qureshi]

0

my dreambox secreen shows
sim201 team #76A
error1 no ca found;
i used dreambox-optiflasher-pro e2-v1.0.9b
i also used dreambox nfc repair tool sim2 edition v2.1
but still face problam,
when i use hyper terminal these result were found
(
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20100419)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND

plz some1 help me

[fairbird]

0

You need to flash old bootlader for sim2.01 ssl76 or any image with ssl76 for sim2.01 by using optiflasher and "Flashing by Null modem cable only without Network lan" method see here how to:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
And try to use newest version for optiflasher..

[waqas qureshi]

0

when i flahhing image in optiflasher job status is not shown,
and tell me during flash new image dreambox light is sstable,blinking or off?

[fairbird]

0

when you flash image or bootloader red light must be flashing ..
Did you follow tutorial carefully ? Did you choose Advanced mode2 ? And are you sure your null cable work fine?

[waqas qureshi]

0

during flash my dreambox light is not flashing,
i chose advance mode 2,
i prepare null modam cable by my self like this

[fairbird]

0

So you have Error connection from pc or from what you made null modem cable "RS232" check it again ...

[fairbird]

0

Closed...Not followed