[midovich229]

0

Hi Yassinov,

i have a dreambox dm800 HD PVR, a clone and the sim is 2.10, made a wrong flash and i got this error:

ERRO1: no ca found.

on putty via telnet i have this informations:


© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #84 (2011-09-02)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

when i use NCF-SIL2-v2.5 i got this message:

Power ON DB Device [ESC to Abort]
Operation Start at: 19:06:11
DM800HD Detected !
Wrong Boot Response!

please help me.

[fairbird]

0

See here how to use optiflasher
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
And use "Repair (No CA Found)" by using "Flashing by Null modem cable only without Network lan" method...
If box booting fine then flash any image compatible with your sim by using "Flashing by Network lan only"

[fairbird]

0

Closed...Not followed