[greig1983]

0

Device Is Not in ***STOP*** MODE !
Disconnect Power ! Press & Keep Holding Power Button
Until Stop Mode Appear on Device Lcd :
192.168.1.177 ***STOP***
Socket Error # 10060
Connection timed out.

I pressed the button and followed instructions. I also changed the LAN connection bit as stated in a previous port.

My box is a sunray dm800se and this is the message I get. When pressing the button the box says: dhcp... ***STOP***

[fairbird]

0

If you get
Socket Error # 10060
Connection timed out.
Repeat click to "Do Job" and you will connect to box...

[greig1983]

0

If you get
Socket Error # 10060
Connection timed out.
Repeat click to "Do Job" and you will connect to box...

This is the messages I get. It says my box is connect but at the bottom corner is says status disconnected. Thanks

[greig1983]

0

I used my lapton and managed to get it flashed with OpenPli.

One question, i have virgin tv and not sure how to set up the tuner configuration to search fir channels? Any help? Thanks

[fairbird]

0

So did you solved..If yes will be closed under solved...
For tuner configuration here..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[greig1983]

0

Hi fairbird,

I changed those settings but never found any channels.

[greig1983]

0

Hi fairbird,

I changed those settings but never found any channels.

I am using virgin media. I have connected the virgin cable to each of the tuners DVB-C, DVB-T and DVB-S/S2 but no luck

Do you know settings for this and also with DVB slot to use?

[fairbird]

0

Please ... make new thread about any problem in general section..
here just for optiflasher problem..
thread closed
Thank you