Device Is Not in ***STOP*** MODE !
Disconnect Power ! Press & Keep Holding Power Button
Until Stop Mode Appear on Device Lcd :
192.168.1.177 ***STOP***
Socket Error # 10060
Connection timed out.
I pressed the button and followed instructions. I also changed the LAN connection bit as stated in a previous port.
My box is a sunray dm800se and this is the message I get. When pressing the button the box says: dhcp... ***STOP***
If you get
Socket Error # 10060
Connection timed out.
Repeat click to "Do Job" and you will connect to box...
(12-26-2012, 07:12 PM)fairbird Wrote: You are not allowed to view links. Register or Login to view.If you get
Socket Error # 10060
Connection timed out.
Repeat click to "Do Job" and you will connect to box...
This is the messages I get. It says my box is connect but at the bottom corner is says status disconnected. Thanks
I used my lapton and managed to get it flashed with OpenPli.
One question, i have virgin tv and not sure how to set up the tuner configuration to search fir channels? Any help? Thanks
So did you solved..If yes will be closed under solved...
For tuner configuration here..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Hi fairbird,
I changed those settings but never found any channels.
(12-27-2012, 11:54 AM)greig1983 Wrote: You are not allowed to view links. Register or Login to view.Hi fairbird,
I changed those settings but never found any channels.
I am using virgin media. I have connected the virgin cable to each of the tuners DVB-C, DVB-T and DVB-S/S2 but no luck
Do you know settings for this and also with DVB slot to use?
Please ... make new thread about any problem in general section..
here just for optiflasher problem..
thread closed
Thank you