0
-DM800
-Clone
-Sim 1.0 T-1 (Maybe, see my problem desscription)
Problem Description and what I have done so far.
Hi, I got a hold of a box that I thought maybe I could fix. After hours and hours I am on the verge of giving up thinking it is a hardware problem or something in that line. The problem is when powering on the box it gives me the NO CA FOUND error display message.
One big problem here is that I don't perssonaly know what kind of simcard is in the box. I have taken it out and looked at it and put it back in several times. I matched it to sim 1.0 T-1 but that could be wrong it looks like the blank sim in the picture attached to the post.
This is what I get when connecting with terminal to the box via serial interface.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #76 (20100419)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
So I have tried with different methods of re-flashing but everything fails for me.
Tested DreamUP_patched_by_forhike_and_natas all different 3 methods provided in that documentation.
Tested NCF SIM2 v2.5 booth with the sim included and whit a 2.01 T-2 sim from a working clone. Both sims gives me "Wrong Boot response" message in NFC program.
Tested DreamBox-OptiFlasher also gives me the same error message as NFC.
So anyone has any thoughts? Is the box totally wasted or is there still hope? I have probably missed some information you need or left something out that I have tried.
-Clone
-Sim 1.0 T-1 (Maybe, see my problem desscription)
Problem Description and what I have done so far.
Hi, I got a hold of a box that I thought maybe I could fix. After hours and hours I am on the verge of giving up thinking it is a hardware problem or something in that line. The problem is when powering on the box it gives me the NO CA FOUND error display message.
One big problem here is that I don't perssonaly know what kind of simcard is in the box. I have taken it out and looked at it and put it back in several times. I matched it to sim 1.0 T-1 but that could be wrong it looks like the blank sim in the picture attached to the post.
This is what I get when connecting with terminal to the box via serial interface.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #76 (20100419)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
So I have tried with different methods of re-flashing but everything fails for me.
Tested DreamUP_patched_by_forhike_and_natas all different 3 methods provided in that documentation.
Tested NCF SIM2 v2.5 booth with the sim included and whit a 2.01 T-2 sim from a working clone. Both sims gives me "Wrong Boot response" message in NFC program.
Tested DreamBox-OptiFlasher also gives me the same error message as NFC.
So anyone has any thoughts? Is the box totally wasted or is there still hope? I have probably missed some information you need or left something out that I have tried.