[mcflyyy]

0

Hello,

i have a big problem with my original drreambox !

I flashed my dreambox with an sim2 flashfirmware ->

And now : i have an error : NO CA FOUND ...

Can you help mee ? You speak in this thread to add a function to restore box for original user ...

I try NCF but i have an error :

Power ON DB Device [ESC to Abort]
Operation Started at: 17:09:38
Wrong Boot Response!

and telnet box :

© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.01(0x133/high) {BO23456}

2ND STAGE OK, build #84 (2011-09-02)

0.000 - BCM board setup
0.002 - fp init
0.003 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

Thank's for your Help.

P.S :
HW ID: [0D0A28632920323030372C3230303820447265616D204D756C 74696D6564696120476D62482E20416C6C2072696768747320 72657365727665642E0D0A0D447265616D626F782044004D38 30300D]


It's possible to fix this with the new version on my original version ?

I must use LD2 tools if i register ?

Thank's in advance :)