0
yesterday I had download the DreamBox-OptiFlasher-Pro-E2-v2.0.0c_0.exe
and I had download original firmware release-dm800-3.2.2.nfi from
After Flashing, I had reboot my unit and my unit cannot reboot any more, it report error1: "No CA Found", please contact
Then I would like to re-flash, but I cannot re-flash again the error message for optiflasher is "Wrong Boot reponse"
My unit data is as below,
===============
1. DM800 HD PVR
2. Original / Genuine
3. SIM ---> I don't know what it is and please help inform how to recoqnized from my unit, I did not find in the manual or on the box
4. ERRO1: No Ca Found After Flash image
Can anyone help me to solve this problem and your help would be very appreciated
the Procedure I make,
1. I flashed with new Secondstage Bootloader "dreambox-secondstage_84-r0_dm800.ipk"
2. after Flashed, the unit show "ERRO1: No Ca Found After Flash image"
3. I download optiflasher and repair & downgrade the bootloader to DM800-SIM2.01-ssl76C and succeed
4. I reboot my DM800 and I show stop mode and the IP is 192.168.1.77 but my subnet router DHCP subnet is 192.168.60.**
5. I tried to upgrade the firmware "release-dm800-3.2.2.nfi" with network capable, but not succeed so I disable network upgrade and use only Null modem Cable
6. after wait for 6 hour the indicator 100%, but the command is flashing **2 (I forget **) and Do Job return to normal, but It did not show succeed or not, then try had reboot, after reboot the unit still show error, then I would like to reflash the firmware or bootloader, but it is impossible because I always had error "Wrong Boot Response"
and I had download original firmware release-dm800-3.2.2.nfi from
After Flashing, I had reboot my unit and my unit cannot reboot any more, it report error1: "No CA Found", please contact
Then I would like to re-flash, but I cannot re-flash again the error message for optiflasher is "Wrong Boot reponse"
My unit data is as below,
===============
1. DM800 HD PVR
2. Original / Genuine
3. SIM ---> I don't know what it is and please help inform how to recoqnized from my unit, I did not find in the manual or on the box
4. ERRO1: No Ca Found After Flash image
Can anyone help me to solve this problem and your help would be very appreciated
the Procedure I make,
1. I flashed with new Secondstage Bootloader "dreambox-secondstage_84-r0_dm800.ipk"
2. after Flashed, the unit show "ERRO1: No Ca Found After Flash image"
3. I download optiflasher and repair & downgrade the bootloader to DM800-SIM2.01-ssl76C and succeed
4. I reboot my DM800 and I show stop mode and the IP is 192.168.1.77 but my subnet router DHCP subnet is 192.168.60.**
5. I tried to upgrade the firmware "release-dm800-3.2.2.nfi" with network capable, but not succeed so I disable network upgrade and use only Null modem Cable
6. after wait for 6 hour the indicator 100%, but the command is flashing **2 (I forget **) and Do Job return to normal, but It did not show succeed or not, then try had reboot, after reboot the unit still show error, then I would like to reflash the firmware or bootloader, but it is impossible because I always had error "Wrong Boot Response"
