[gusrich]

0

A few little problems I can't figure out. Connected my 800 se clone to OptiFlasher in TV mode & detected Barry Allen V6.0.1, yet for some reason I couldn't install TSpanel through the installer & can't install new images with the Barry Allen Manager. All i get is 'Could not create file. EIdProtocolReplyError'?!
I installed TSpanel manually with no problems after but would like to be able to use OptiFlasher as it looks like great software & easy to use. thank you

[evilchinchi]

0

Hello,
Thanks in advance for your help, and sorry for my english, it is not so good.
First of all, i want to tell you that i have an original dm800hd. A friend who i borrowed my db, tried to put a new image, but he fail, and now the box say the terrible sentence "erro1: no ca found". I tried everything to connect with it without succes.
I press connect button on dreamup, and when i plug on the db, the program doesnt seems to find anything. The same with your program :S , it stays on "Power ON DB Device [Esc to abort].
Can you please help me?

[acorab]

0

Software is unvisible in.ver1.0.8 and version 1.06 and 1.07.visibile.Problem?
No windows

[acorab]

0

OS is win7.and for donate is OK for licence 5$???
tnnx

[floridali]

0

Hi there

I have DM800 HD PVR clone with sim 2.01
got >NO CA FOUND error
and when i try to flash it (Dreamup with RS232 Cable) it says >FILE TOO BIG
I try to use Optiflash E2 1.08 i can't even connect with my DB
What sould I do, could anyone here to help me please...

Finally I got above message:
PLEASE HELP
Name: secondstage-dm800-69.nfi
FSize: 170608 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
OptiFlasher Error: Socket Error # 10060
Connection timed out.

Thank you

[floridali]

0

Finally I got above message:
PLEASE HELP
Name: secondstage-dm800-69.nfi
FSize: 170608 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
OptiFlasher Error: Socket Error # 10060
Connection timed out.

Then try Advanced mode
it says please turn on your device but it's on
I dont know wot the do:((

[floridali]

0

Finally I got above message:
PLEASE HELP
Name: secondstage-dm800-69.nfi
FSize: 170608 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
OptiFlasher Error: Socket Error # 10060
Connection timed out.

Then try Advanced mode
it says please turn on your device but it's on
I dont know wot the do:((

Mean that you box lost IP connection for some external reason related with box or network !
Try use the 2nd advanced mode from settings & write using only RS232

Sorry but it's still same :((( Another option?

[eshan]

0

thank you YASSINOV
very good job

[bulldogz67]

0

Hi
I am looking Key Product for Optiflasher
Thank you.

[Lampenkap]

0

Sorry but it's still same :((( Another option?

Try to use a full nullmodem cable. What means that pin 2 till 8 are connected on both sides.