[Sa2mY]

0

Bonsoir a tous,

Je suis nouveau sur le forum et je cherche depuis 2 nuit comment réparer ma DreamBox 800HD PVR. Mais je n'y arrive pas ! C'est la première fois que j'achète une DreamBox et j'ai le problème suivant :
ERRO1 NO CA FOUND

Quand j'essai avec Dreambox NCF Repair Tool Sim2 EDition V2.5 j'ai le message suivant :
- Power ON DB Device (ESC to Abort)

L'écran de ma Dreambox reste bloqué sur ce message d'erreur, il n'y a rien a faire.
Je demande donc votre aide !

Je peux payer par PayPal si quelqu'un arrive a m'aider.

Merci d'avance.

Sammy.

[fairbird]

0

Do you need help?
Please use English ....

[Sa2mY]

0

Hi fairbird,

Thanks for your answere. I'll try in english :D

I can't solve the ERRO1 NO CA FOUND. I've tried Dreambox NCF Repair Tool Sim2 EDition V2.5 and I have this message : - Power ON DB Device (ESC to Abort).

I can't do anything, my dreambox is blocked with this message.

I can pay by PayPal if someone can help me to make my dreambox works.

Thanks.

[fairbird]

0

Did you read this topic first?
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[Sa2mY]

0

Sorry,

So I have a DreamBox 800 HD PVR.
I don't know if it is a clone or not, but I think so.
When I opened it was written Sim 201.
And as I said before my problem is NO CA FOUND after I flashed my DM, and I tried with NCF Repair Tool Sim2 EDition V2.5 but it didn't worked because the DreamBox stay on this error message so it don't detect the DreamBox.

[fairbird]

0

Sim2.01 then your box is clone...and must be to flash only patched images for sim2 not another image..

Read these topic to fix your box ...and as I'm said only patched images for sim2 flash go to image section...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and this one also
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[Sa2mY]

0

I didn't worked.. I always have the same problem. The device is connect COM3 but it puts POWER ON DB DEVICE.

[fairbird]

0

Then you have connection problem:
1-use another cables
2-use another pc
3-Check your anti virus may block optiflasher ..

[brianmullen8]

0

Try open hyper terminal and when it says no ca found press x on your keyboard