Aide DM800 HD PVR - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: Aide DM800 HD PVR (/showthread.php?tid=2520)

Aide DM800 HD PVR - Sa2mY - 03-19-2014 Bonsoir a tous, Je suis nouveau sur le forum et je cherche depuis 2 nuit comment réparer ma DreamBox 800HD PVR. Mais je n'y arrive pas ! C'est la première fois que j'achète une DreamBox et j'ai le problème suivant : ERRO1 NO CA FOUND Quand j'essai avec Dreambox NCF Repair Tool Sim2 EDition V2.5 j'ai le message suivant : - Power ON DB Device (ESC to Abort) L'écran de ma Dreambox reste bloqué sur ce message d'erreur, il n'y a rien a faire. Je demande donc votre aide ! Je peux payer par PayPal si quelqu'un arrive a m'aider. Merci d'avance. Sammy. RE: Aide DM800 HD PVR - fairbird - 03-19-2014 Do you need help? Please use English .... RE: Aide DM800 HD PVR - Sa2mY - 03-22-2014 Hi fairbird, Thanks for your answere. I'll try in english :D I can't solve the ERRO1 NO CA FOUND. I've tried Dreambox NCF Repair Tool Sim2 EDition V2.5 and I have this message : - Power ON DB Device (ESC to Abort). I can't do anything, my dreambox is blocked with this message. I can pay by PayPal if someone can help me to make my dreambox works. Thanks. RE: Aide DM800 HD PVR - fairbird - 03-22-2014 Did you read this topic first? [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] RE: Aide DM800 HD PVR - Sa2mY - 03-23-2014 Sorry, So I have a DreamBox 800 HD PVR. I don't know if it is a clone or not, but I think so. When I opened it was written Sim 201. And as I said before my problem is NO CA FOUND after I flashed my DM, and I tried with NCF Repair Tool Sim2 EDition V2.5 but it didn't worked because the DreamBox stay on this error message so it don't detect the DreamBox. RE: Aide DM800 HD PVR - fairbird - 03-23-2014 Sim2.01 then your box is clone...and must be to flash only patched images for sim2 not another image.. Read these topic to fix your box ...and as I'm said only patched images for sim2 flash go to image section... [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] and this one also [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] RE: Aide DM800 HD PVR - Sa2mY - 03-24-2014 I didn't worked.. I always have the same problem. The device is connect COM3 but it puts POWER ON DB DEVICE. RE: Aide DM800 HD PVR - fairbird - 03-25-2014 Then you have connection problem: 1-use another cables 2-use another pc 3-Check your anti virus may block optiflasher .. RE: Aide DM800 HD PVR - brianmullen8 - 04-14-2014 Try open hyper terminal and when it says no ca found press x on your keyboard