+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Dream box no ca found help (DM800se-Ferrari Sim) (/showthread.php?tid=539)
Dream box no ca found help (DM800se-Ferrari Sim) - akhan - 04-28-2012
-dream box 800 hd se
-clone
-The sim card is ferrari card.
The first time i flashed the receiver, i got " no ca found" .
The second time i flashed , i got " second failed" with picture of usb.
How can the problem be corrected? please help! What is next stage i should go?
Thank you
akhan
RE: Dream box no ca found help - fairbird - 04-28-2012
In attachment last bootloader for ferrari sim is SSl87F..
1.download file and extract it.
2.Use optiflasher here
3. Flash SSl87F by optiflasher with null modem cable only see this replay
4.Unplug box and plug it again and see what happen..if booting it's fine if not try to flash any ferrari image with SSl87F.
Let we know about your result...
RE: Dream box no ca found help - valentino50 - 04-29-2012
Hi to everyone.
after trying to flash twice my DM800HD se clone the message appear on the front panel RO1 NO CA FOUND.... i wonder if someone can help please....i have been reading almost all threads about problem caused by RO1 NO CA FOUND and tried to fellow some advise but still didnt resolve it..
my DM800se clone boot82 allrussian...
your help will be much appreciated..
RE: Dream box no ca found help - fairbird - 04-29-2012
Try to open box and remove sim card and clean it from dust and clean also sim holder and then put your sim in correctly area.... or see this topic
And next time please make new topic..
RE: Dream box no ca found help - akhan - 04-29-2012
I got an error message " socket error - 10060" on the loader. What does it mean?
RE: Dream box no ca found help - fairbird - 04-29-2012
Ok try to fix socekt error by optiflasher as pictures below and flash any image..
RE: Dream box no ca found help - akhan - 04-30-2012
Fairbird , Thank you for your help!
I have done all the step you have sent to me, I got such message from my loader.
" Device is not in ***. Stopped mode.
disconnect power, press keep holding power button until stop mode appear on device led.
192.168.1.128 *** stop***"
This is the first time I flashed the device, and we flash wrong image and " no ca found"
What's the next step? Thank you
Akhan
RE: Dream box no ca found help - fairbird - 05-01-2012
Please Follow my steps replay exactly... i have never to mentioned to flash box with Stopped mode...I have said by optiflasher and null mode cable without network lan as like in this replay need to keep holding power button if you want use cable only, just after click make job on optiflasher unplug box and plug it then software will be running...
RE: Dream box no ca found help - akhan - 05-02-2012
got:
Device Is Not in ***STOP*** MODE !
Disconnect Power ! Press & Keep Holding Power Button
Until Stop Mode Appear on Device Lcd :
192.168.1.124 ***STOP***
what is next step?
RE: Dream box no ca found help - fairbird - 05-02-2012
First please don't replay in another topic just in your topic, i have deleted that your replay in there.
Second please please understand what i said, i have mentioned to you two times don't use lan network just cable... "Disconnect Power ! Press & Keep Holding Power Button" no need to use this step never...no need to get ip adresse.
After click Do job option in optiflasher then connect Power to box and don't Press & Keep Holding Power Button just leve it and program will be running and open new window to select what you want to flash bootloader or image....Do you understand me now?
See this replay to know how to use cable only