InfoServ
[SOLVED] dm800 hd clone "Dream Multimedia Error!" - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] dm800 hd clone "Dream Multimedia Error!" (/showthread.php?tid=3176)

Pages: 1 2


dm800 hd clone "Dream Multimedia Error!" - topdecker - 11-18-2014

Hi there,

i have a "made in china" dreambox 800 HD clone.
it has a Ferrari sim card inside.
i had nemesis somewhat installed before.

from one day to another (after a hangup and cold reset) it only shows:

"Dream Multimedia -> Error!" few seconds after i connect the power to the box.

the last days i have read a lot in forums and tried a lot of different stuff to fix it.
dreamup patchted by forhike and natas only led to no CA found errors.

---

lastly i found OptiFlasher Ultimate Pro 2.0.0.9...

i flashed the box according and exactly after the thread described by fairbird "flash using only nullmodem cable"...
and i chose the latest ferrari ssl 88f to it.
after phase 2 comes:
"Dreambox flashed successfully!"

then i switched to the webinterface.
device info shows the following:

Information Product Name ???
Booloader version Dreambox Second Stage Loader BUILD #65,
built 20080927
Flash Size 64 MB
Production Date (YYYY/MM/DD) N/A
mID ?
Serial Number ?
MAC Address ?
Printed Serial Number ?

then i tried to flash firmware (i think i can flash images here, is that right??) (strangely that function only worked with IE and not with chrome or firefox) with three different new images specially pachted for a dm800 clone:
(OpenXTA-4.0_Ferrari-SSL88F_DM800_20141015_RAED, Open-Death_Ferrari-SSL88F_dm800_20141002_RAED and BlackHole-2.1.3_Ferrari-SSL88F_dm800_20141113_RAED_V2).
it takes a bit of time to flash over nullmodem, but after 2 minutes or so it says: "finished 100%".

then i pulled the power and reconnected the power ( i think that is the appropriate reset method now?) and expected it to boot up normally...

BUT:
only the "Dream Multimedia -> Error!" message came up after a few seconds again...

Im LOST and frustrated.
What am i missing or what am i doing wrong?

thanks for any help guys!


RE: dm800 hd clone "Dream Multimedia Error!" - fairbird - 11-18-2014

Dream Multimedia -> Error!
mean Sim issue (Hardware) not software

Your sim Is Ferrari Sim or White sim1 and you has upgraded it to Ferrari?


RE: dm800 hd clone "Dream Multimedia Error!" - topdecker - 11-18-2014

it is a ferrari sim with red / black ferrari logo / horse on it...

there is also a button on the bottom of the box:
"ferrari sim inside"


RE: dm800 hd clone "Dream Multimedia Error!" - fairbird - 11-19-2014

Ok...then you have problem with sim may be not in correct place...
Better things ask (Johnny_B) technical man to Ferrari boxes here in Ferrari support Fourm
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
By the way (There is new sim released from Ferrari team) supported OE2.0 with original drivers
you can ask theme about new sim here
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]


RE: dm800 hd clone "Dream Multimedia Error!" - topdecker - 11-19-2014

fairbird, first things first: thanks for the help

the problem with that forum is:
i tried to register there tweo times in the last three days, but dont get any confirmation mail where i can confirm and activate my account over there...

it seems they ste that confirmation email to manual and the admin seems to be away...

(activation worked at this forum here also well after half a day of wait for the email)

seems i need to write that admin or so...


so as summary:
u seem pretty sure, taht these multimedia erros dont have anything to do with software, but only with the sim card...... hum k..

i checked the place of teh sim card few days ago. at first it was lose, but then i placed it corrctly and since then it was perfectly in place in the holder...
maybe it has taken damage before when it want in correct place and is now not working althogh its now it its place...


RE: dm800 hd clone "Dream Multimedia Error!" - fairbird - 11-19-2014

I don't think so ...If you do correct register then directly you get confirm link ...
What is your nick name there? I will check it with Keymaster


As i said you have hardware issue better to ask (Johnny_B) or (Toysoft)


RE: dm800 hd clone "Dream Multimedia Error!" - topdecker - 11-20-2014

hm i think i did two correct registration tries...
each confirmed and announcing the confirmation email.

nickname is topdecker, same data and also email as here.

thanks for checking on that !


RE: dm800 hd clone "Dream Multimedia Error!" - fairbird - 11-20-2014

As i said I think you did not registered correctly ...
This is quote form Toysoft

Toysoft Wrote:He is not registered on 8a8f8, "topdecker", there is no member with that nickname.

TS



RE: dm800 hd clone "Dream Multimedia Error!" - topdecker - 11-20-2014

I tried again now and got that message like at the last try:

"User has been registered.
Your account has been created. Thank you for registering on our forums. You need to verify your email to activate this account. You will receive an email shortly with instructions for verifying your email. If this account isn't verified within 24 hours it will be deleted. "

user is topdecker.

Lets see what happens :)

---

tried a random login and got:
"UBB Message
The email for this account has not yet been verified. "

No Email received yet...


RE: dm800 hd clone "Dream Multimedia Error!" - fairbird - 11-20-2014

Ok..I Will be wait Keymaster also to make it clear ..