+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] DM800HD PVR Clone - No CA Found (/showthread.php?tid=2301)
Pages:
1
2
RE: DM800HD PVR Clone - No CA Found - samui67 - 12-16-2013
Hi Fairbird,
no, i never tried this way, first time i see it!
But for a Telnet connection, you need a working network connection.
How can i get a working network connection if i cannot initialize the
Bootloader because of the No CA Found - both LED's (yellow and green one) are always on, when i switch on the box...
Is there another way, still can get the network running ???
RE: DM800HD PVR Clone - No CA Found - fairbird - 12-17-2013
Ops...Sorry I forget you have No Ca found (So no Ip shown)
Sorry the Only way by null cable if not connected then you can not fix No Ca Found
RE: DM800HD PVR Clone - No CA Found - samui67 - 12-26-2013
Meanwhile i found a solution for this issue.
I connected my original DM7000 with Dreamup.
Then switched my serial cable to my DM800HD
and flashed the loader. At once i got a DHCP
address and was able to flash the right Image
with the WebIf.
Please close this Topic and thank you all again!
Merry X-Mas and a Happy New Year
RE: DM800HD PVR Clone - No CA Found - fairbird - 12-26-2013
Closed Under Solved