+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: NFC hangs on "Finalizing Job Phase2...Please Wait..." (/showthread.php?tid=2088)
NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-17-2013
anyone have a clue about this problem?
box is DM800HD SE SIM 2.10...
log print screen:
![[Image: dbox.png]](https://dl.dropboxusercontent.com/u/5297373/dbox.png)
when i try inject image via browser I got this message:
too much data (or bad sectors) in partition 1 (end:00040000, pos:00040000)
is it faulty NAND with bad sectors?
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-17-2013
now it hangs here:
![[Image: drmx.png]](https://dl.dropboxusercontent.com/u/5297373/drmx.png)
try to inject image i got same thing after uploading:
![[Image: drm.png]](https://dl.dropboxusercontent.com/u/5297373/drm.png)
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - fairbird - 10-17-2013
Try with recovered bad sectors
(3-Fix Bad Sector "Sectors Recovery")
or here
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-17-2013
in all situations from screenshots i checked "Sectors Recovery [DM800SE/DM800hd/DM500hd/SIM2]"
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-18-2013
i got same situation after cleaning sim card and socket :/
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - fairbird - 10-18-2013
Try another mini usb cable + Lan cable also better try it on another pc ...
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-18-2013
i tried everything.. pic with win xp, win 7, diferent cables, but with no luck...
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - fairbird - 10-18-2013
Try to remove sim and flash bootloader to box without sim .. and see what happen ?
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - Proximus - 10-18-2013
i can do that:
![[Image: dbxboot.png]](https://dl.dropboxusercontent.com/u/5297373/dbxboot.png)
on box i got 192.168.1.77
*** SERIAL SETUP ***
on NFC without SIM same thing:
![[Image: dbox22.png]](https://dl.dropboxusercontent.com/u/5297373/dbox22.png)
optiflasher after upload image hangs on:
newnigma2-dm800se-v3-3-2-ramiMAHER.nfi
on:
OpenEmbed-dm800se-SIM2-84b-ByYASSINOV.nfi
OpenPLi-2.1-Sunray sr4-20120103-sim210-ssl84b-by sat gr.nfi
OpenPLi-2.1-beta-dm800se-20120701-sim210-ssl84b.nfi
says wrong architecture...
maybe to try other images?
RE: NFC hangs on "Finalizing Job Phase2...Please Wait..." - fairbird - 10-18-2013
-Use optiflasher
-Select settings
-Choose advanced mode 2 not mode 1