+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35)
+--- Thread: [Request] Does not boot after wrong ssl reflash (/showthread.php?tid=1651)
Pages:
1
2
RE: Does not boot after wrong ssl reflash - redcorex - 05-20-2013
I have donated to discover LD2 feature. I did the job. But process stops with message "Finalizing Job Phase2... Please wait..." and on OLED screen: "System Message" and nothing happens. Status bar of Optiflasher is "Status: Disconnected". What should be displayed to make me sure the process has been completed?
RE: Does not boot after wrong ssl reflash - fairbird - 05-20-2013
Have a look this topic to know what you want to know.. :/
RE: Does not boot after wrong ssl reflash - redcorex - 05-27-2013
I cannot figure out by the topic you suggest. I've got the following:
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader... [NO_CA_FOUND]
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-dm800-84.nfi
FSize: 149488 bytes
Flashing BootLoader Phase1...
Finalizing Job Phase2...Please Wait... [booting...]
It's not finishing the job just "please wait" and wait thats it...
The result is "Dream mutimeida-> Error"
Tried to flash image after reconnect power with the same result. What also could I try? Maybe hyper terminal log may help to figure out?
hterm log
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
RE: Does not boot after wrong ssl reflash - fairbird - 05-27-2013
If you got this ERROR "Dream mutimeida-> Error" this means sim corrupted or sim not in correct place..
open box and remove sim replace it again and make sure in correct place, if still "Dream mutimeida-> Error" means sim damage as i said before...need another sim :\
RE: Does not boot after wrong ssl reflash - redcorex - 05-27-2013
Do you mean corrupted SIM causes never finishing job? And "Dream mutimeida-> Error" cannot produce error like "Second stage loader wasn't found. ", right?
RE: Does not boot after wrong ssl reflash - fairbird - 05-28-2013
Yes IF ONLY get ("Dream mutimeida-> Error") this error cases from sim...
Did You do what I said in previous replay? open box remove sim replace it in correct place?
If yes then you need to contact with Dream multimedia For another sim...
RE: Does not boot after wrong ssl reflash - fairbird - 08-01-2013
Closed Not Followed ...