+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Clone oer Genuine (/showthread.php?tid=1577)
Pages:
1
2
Clone oer Genuine - marekkukla - 04-02-2013
I have a NO CA problem. Before I make something with Optiflasher, please somebody tell me: is my DM500HD a Clone? I see SSL 84. Is SIM 2.10 correct?
See Attachment, Fotos as PDF and the Log from Hyperterminal as .txt
RE: Clone oer Genuine - fairbird - 04-03-2013
Your sim not multimedia (original) it is looks like sim1 T3 with old bootloader (ssl72 or ssl76)
Sim multimedia (original)
[attachment=384]
Sim2.01
[attachment=385]
RE: Clone oer Genuine - marekkukla - 04-03-2013
Thank You.
SIM1 in DM500HD, its work? so what should I do? From hyperterminal you can read:
FIRST STAGE 1.0/400 {BO23456}
2ND STAGE OK, build #84 (2011-09-01)
I have the card-reader Phoenix, all cables, osciloscope, multimeter, Optiflasher Pro registred and more...
In awaiting you answer I try any option's of Optiflasher, first I try with baudrate 57600, ssl84
RE: Clone oer Genuine - frank087234 - 04-03-2013
where does the no ca message appear???
RE: Clone oer Genuine - marekkukla - 04-03-2013
(04-03-2013, 10:02 AM)frank087234 Wrote: You are not allowed to view links. Register or Login to view.where does the no ca message appear???
see attachment txt file in my first post, at the end
the dream is hanging after 2 stage
I must press the power button on the front panel.
RE: Clone oer Genuine - fairbird - 04-03-2013
As your picture attached shown, it was sim1 T3 and this is stranger to me also ...
The sim type of Sim2 and Ferrari are different not as your sim..
About how to fixed.. Try with optiflasher ...
(1-Null modem cable only without Network lan.) method
-Select loader (LD1)
-Select Repair [No Ca Found]
-choose DM500-Sim2.01-ssl84b
And see What will happen?
RE: Clone oer Genuine - marekkukla - 04-03-2013
HI
every times I have:
"please be sure that RG45 is connected" but I choise RS232 only...
Next, I try any ssl's with any all will be correctly installed
I have answer:
"Second stage OK
Boot success and read for job progress"
One time had ask me for IP...
This is my first Dream, so thank you for you help
RE: Clone oer Genuine - fairbird - 04-03-2013
I don't got it...Did you solved your problem or not?
RE: Clone oer Genuine - marekkukla - 04-03-2013
(04-03-2013, 06:57 PM)fairbird Wrote: You are not allowed to view links. Register or Login to view.I don't got it...Did you solved your problem or not?
no, because I check after this via Hyperterminal, and everytimes I have NO CA, same like in atachement.
Next; I select "without LAN", so why is comming responde from Optiflasher "please be sure that RG45 is connected"
RE: Clone oer Genuine - marekkukla - 04-03-2013
I have DM500HD, so must I have LAN, or not?
in my Optiflasher Pro E2 2.0.0.4 I not have option for
-choose DM500-Sim2.01-ssl84b
only
DM800-sim2.01-ssl84b