dm800se sim2.10 don't boot - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35) +--- Thread: dm800se sim2.10 don't boot (/showthread.php?tid=1519) Pages:
1
2
|
dm800se sim2.10 don't boot - Matte540 - 03-12-2013 Hello! I have dm800se SR4 Sim 2.10 Clone Bootloader ssl84? (I think) Box is only 1 month old and after a failed flashing box won't boot. I get no error message it get stuck on Sim2&4 in oled. When I try flashing it nfi uploads but it won't flash from it's memory. I've tried recovery with NCF and Optiflasher but it always stucks. I get errormessage in Optiflasher Socket error #10053. Please help! I'm very confused. RE: dm800se sim2.10 don't boot - fairbird - 03-12-2013 You need to flash bootloader or image with recovered sectors.. See here how to use optiflasher: and follow "Fix Bad Sector "Sectors Recovery" -select com -select Loader (LD1) For sim2 First try to select Repair [No Ca Found] and choose Dm800se-sim201-ssl84b..If box booting again it is ok .. Second If not boot then repeat steps and select write image then choose any image for Dm800se-sim201 (it will be take around hour or more..but will be fix your box..) RE: dm800se sim2.10 don't boot - Matte540 - 03-12-2013 Ok thanks for reply. Will try this. But do you really mean I should use SIM 2.01 or did you read wrong. I have a SIM 2.10? RE: dm800se sim2.10 don't boot - fairbird - 03-13-2013 Nothing different..It's same bootloader have ... RE: dm800se sim2.10 don't boot - Matte540 - 03-13-2013 Is it ok if I get stuck on phase two on recovery or should I get a confirmation message. I waited two hours and nothing happens. RE: dm800se sim2.10 don't boot - fairbird - 03-13-2013 Then try -Download -open it -select Extras-Recovered bad sectors -Remove check from Use network -click connect -open power to your box -wait to appear flash button -then click browser to choose image and flash it RE: dm800se sim2.10 don't boot - Matte540 - 03-13-2013 Ok will try that! How long time is normal for CA not found repair with recover bad sectors? RE: dm800se sim2.10 don't boot - Matte540 - 03-14-2013 No luck yet. Is it possible I have wrong Ssl? How can I check which one I should use? RE: dm800se sim2.10 don't boot - Matte540 - 03-14-2013 Could my simcard be broken? I can never flash anything finished. It always get stuck on "please wait" both bootloader and image? Please help! RE: dm800se sim2.10 don't boot - fairbird - 03-15-2013 Remove sim carefully and replace it again, make sure in correct place ... And give usr out but from this.. |