0
I have 2 x dm800 simcard 2.01. When you plug the power to them all i get on the screen is DREAM multimedia then after a few seconds it switches to DREAM MULTIMEDIA ->>>ERROR!!
Ive tried the NO CA repair option on the software but it still same.
Ive also tried flashing new image but it still same.
Ive tried using just the rs232 and also rs232 + lan both produce same results.
The first dreambox has the following output from the hyperterm
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
The 2nd dm800 is like this in hyper term
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
I would also like to state that ive already tried the NO CA repair for 4 different bootloaders and it says flashed successfully then when u reboot them the same error occurs.
Also ive tried dreamup to fix these and it produces the NO CA error on screen which is annoying cause i try this and it doesnt solve it so dreamup also doesnt work.
Ive also tried just flashing a new image to the box using optiflasher and still same error
Really annoying im hoping someone can help or show me how dumb im being lol.
Cheers
Ive tried the NO CA repair option on the software but it still same.
Ive also tried flashing new image but it still same.
Ive tried using just the rs232 and also rs232 + lan both produce same results.
The first dreambox has the following output from the hyperterm
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
The 2nd dm800 is like this in hyper term
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
I would also like to state that ive already tried the NO CA repair for 4 different bootloaders and it says flashed successfully then when u reboot them the same error occurs.
Also ive tried dreamup to fix these and it produces the NO CA error on screen which is annoying cause i try this and it doesnt solve it so dreamup also doesnt work.
Ive also tried just flashing a new image to the box using optiflasher and still same error
Really annoying im hoping someone can help or show me how dumb im being lol.
Cheers
