[papi1962]

0

I use the opti flasher to repair no ca fond

when i try to connect via web interface on the showed ip this is what apear - what else can i try

This is the ??? bootloader Web Interface.


If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...

You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is ?, and was built on N/A.

Booloader version: Dreambox Second Stage Loader BUILD #79, built 20101015

device info firmware upgrade

[fairbird]

0

Read this ...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[papi1962]

0

I try also with instructions in pdf - not working for me - the flash button could not be pressed, and on box is written no ca found.

With optiflasher i use repair no ca found and on the box screen appear the ip adress - but i can not load the img - opti flasher is not actoivated for download img. and can not istal the img which is on my pc.

[papi1962]

0

When i connect with putty to the ip adress shown on box the only avaliable info is
Product ???
Bootloader version: Build #79, built 20101015,
The rest is N/A

[fairbird]

0

Did you followed those links ?!
If Yes and no connect then try other pc (win xp) better see this photo ..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[papi1962]

0

Yes, i followed the links, i try estar dream up on 2 PC one iz win7 the other is XP with same results, "upload completed, waiting for acknowledge.." the "Flash" button in Dreamup is greyed out. My DM800SE still displays "Err01: No CA Found"

With optiflasher i use repair no ca found and on the box screen appear the ip adress - but i can not load the img - opti flasher is not activated for download img. and can not istall the img which is on my pc.

[fairbird]

0

Then maybe you have hardware problem in connection ..
-Maybe from pc
-Maybe from network card i box
-Maybe on mini usb + lan cables

[papi1962]

0

I'm waiting for key to activate optiflasher - i already made payment- then i will retry with full working version - maybe could help.

[papi1962]

0

with optiflasher i arrive till [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] but on display is IP 192.168.1.77 **SERIAL SETUP** and the warning from optiflasher box is not in STOP mode [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[fairbird]

0

1-Follow those Solved topic carefully.
2-Must be to use both cables together (mini usb + lan)
3-Also follow this video
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
4-As i said before if all advises not help you then you need technical man (hardware problem)