[salmonhand]

0

i bought OptiFlasher Pro Ultimate i have a Genuine Dreambox DM800HD pvr when turned on it say no CA Found.

i connected both null modem serial cable and internet/ethernet cable and selected COM Port 3 and LD2 loader Use RS232/USB Mode Only [Advanced Mode2] Genuine [Original-A8P]

i downloaded
OoZooN-Image-dm800-release-4.1.nfi from OptiFlasher Program and i got secondstage-dm800-84.nfi from google

then clicked Repair [No Ca
after flashing it says boot 84

192.168.1.77
**Serial Connection**

then i clicked write/update bootloader
and flashed secondstage-dm800-84.nfi

then clicked write image and flashed
OoZooN-Image-dm800-release-4.1.nfi

and rebooted but it still says Error NO CA.

could you help me fix it?

[fairbird]

0

no need to flash bootoader ...
Just flash directly new original image with Advanced2 and this step should be take around one and half hour to flash image ...
Read this topic and follow setp ...
(1-Null modem cable only without Network lan.)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[salmonhand]

0

for some reason the box doesn't like flashing a image by serial cable.
i flashed a few different original images by network cable from optiflash and web browser ip 192.168.1.77

but no joy yet, ERR01 no ca found.
look at [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

what else should i try? maybe its a clone box afterall?

[salmonhand]

0

i downloaded and flashed /dm800/release-dm800-3.2.4.nfi from the official website and it says no ca found

[fairbird]

0

Are you sure your box is genuine ?!
can you open box and see what kind of sim card you have inside it ?!

[salmonhand]

0

Are you sure your box is genuine ?!
can you open box and see what kind of sim card you have inside it ?!

It's a e-star SIM v3.0

[salmonhand]

0

Are you sure your box is genuine ?!
can you open box and see what kind of sim card you have inside it ?!

i'm slowly flashing estar_BlackHole-1-7-0-dm800hd-ramiMAHER.nfi by COM3 serial cable with estar-DreamUP_1_3_3_4.exe

hopefully it will work. :D

[fairbird]

0

Solved