[baber]

0

dear friend
Hi

yesterday i bought new dm900 4k i did not flash any image on that i turn off that and now when want power on from back just show red light in front of panel and can not go in rescue mode just can connect with serviced console with com3 and i buy your software optiflasher pro dmips edition 3.0.2.3

but nothing do any

this is my log

CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=0000037a(890)
temperature=0000d31b(54043)
PV=0000033e(830)
MV=0000037b(891)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000
MEMSYS ERROR: 00000001

eMEMC:
00000000
ePHY: 00000000
eSHMOO: 12400000 00000082 00000000
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a2f2b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed

when press on do job just show attached pic and nothing do after 30 min

[baber]

0

Hi
From the log that you attached is looks that you have a hardware issue with memory .
Your box is under warranty ? If yes you have to contact your reseller to make a replacement .
This issue start to be popular for many people with this model except this any software issue
OptiFlasher DMips will deal with it .

thanks

but why appear this problem for dreambox 900 ??? has all dreambox 900 this problem ???

BR

[maxidream]

0

i have the same problem do you think optiflasher will fix this error ???

[maxidream]

0

after i bought key and tried it's not fixed my problem

[maxidream]

0

NOTHING CAN DO NEED REPLACE TO NEW ONE


this is my log

CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=0000037a(890)
temperature=0000d31b(54043)
PV=0000033e(830)
MV=0000037b(891)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000
MEMSYS ERROR: 00000001

eMEMC:
00000000
ePHY: 00000000
eSHMOO: 12400000 00000082 00000000
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a2f2b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed

[Motogato]

0

Hello, is possibel optiflasher solve my problem? this is my log....

CPU 01
Dreambox DM900

AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000395(917)
temperature=0000c998(51608)
PV=00000354(852)
MV=00000395(917)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss 07080cd0
_ebss 0713dd70
_end 0713dd90
HEAP @ 07200000
STACK @ 09300000
ARCH: CONFIG OK
CLR BSS 07080cd0 to 0713dd70 OK
CLR SRAM OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

 ,/ 
 ,'/___, BOLT v1.18 v1.18 LOCAL BUILD
.'__ ,'  (2017-03-07 20:27:59 cynric@cynric-VirtualBox)
 /,'  Copyright © 2017 Broadcom
 /' 

Board: BCM97252SSFF
SYS_CTRL: product=72521, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000001 power_on (1 of 23 possible causes)
CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
CS1: NAND: unrecognized ID: 0x20ffff 0xffffffff
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 5
card if inited
set pwm to 0/255
disp id 0000
load image
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.914V, T=+54.043C, PV=0.852V, MV=0.917V, FW=30333278 [0.3.2.x]
USB otp=00000040
USB @ 0xf0470200: IPP is active low, IOC is negative polarity
init fp
found card in unknown state
cannot read T1 header
error in receive
error during t1 transfer
cannot read fabca-cert
retrying.. card if inited
found card in unknown state
cannot read T1 header
error in receive
error during t1 transfer
cannot read fabca-cert
retrying.. card if inited
found card in unknown state
cannot read T1 header
error in receive
error during t1 transfer
cannot read fabca-cert
retrying.. card if inited
found card in unknown state
cannot read T1 header
error in receive
error during t1 transfer
cannot read fabca-cert
retrying.. card if inited
found card in unknown state
cannot read T1 header
error in receive
error during t1 transfer
cannot read fabca-cert
retrying.. card if inited
set pwm to 200/255
TPM error. Please contact Dreambox support