(05-31-2019, 08:10 PM)kazuya1 Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

---

RE: DM900 RED LIGHT - vulkcanox - 06-07-2020

I have the same problem, but I can not get the IP adress, and when I use the mini-usb cable the soft optiflasher it not connect to the DM900. what can be??
there is a a specified cable??
what are the COM port config??

My DM900 is original.

---

RE: DM900 RED LIGHT - YASSINOV - 06-08-2020

@vulkcanox
Have you installed the usb driver ?
When you connect the box mini usb port with your Pc is there any detection ?

---

RE: DM900 RED LIGHT - vulkcanox - 06-09-2020

(06-08-2020, 05:31 PM)YASSINOV Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

but no log made.
I have a mini-usb cable that I use to programme a CASIO calculater.

thare is any other way like JATG?

---

RE: DM900 RED LIGHT - emadogamal - 09-07-2020

(11-28-2018, 03:22 PM)pjalmeida Wrote: You are not allowed to view links. Register or Login to view.Hi!

Can you help me?

Can OPTIPRO solve have this problem:

++++

CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000391(913)
 temperature=0000926d(37485)
 PV=00000352(850)
 MV=00000391(913)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000
MEMSYS ERROR: 00000001

eMEMC:
 00000000
 ePHY: 00000000
eSHMOO:  10400000 00000082 00000000
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a2f2b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed

++++

Dear Good morning
i have the same problem ,how you solved it .
please i need help 
thank you all

---

RE: DM900 RED LIGHT - kevmic - 01-27-2021

maybe someone can help me it stops at starting recovery. the dm900 is detected and . What files do i need to put on the usb drive. just the recovery file or with folder? been trying to fix for 24 hours and cannot manage. very frustrating

---

RE: DM900 RED LIGHT - YASSINOV - 01-27-2021

(01-27-2021, 10:16 AM)kevmic Wrote: You are not allowed to view links. Register or Login to view.maybe someone can help me it stops at starting recovery. the dm900 is detected and . What files do i need to put on the usb drive. just the recovery file or with folder? been trying to fix for 24 hours and cannot manage. very frustrating

Hi
if your box can't reach the network & there's no ip adress then
you need to use the advanced mode with mini usb cable to get it work .
for instructions same basic as DM900 .
there's a video tutorial for Red Light Fix DM900 you can apply it same.

regards , yassinov

---