InfoServ

Please help. Dream Multimedia error again...

WITH DREAMUP PATCHED (Vers. 2009 or 1.3.3.4)

After pushing the connection button, it show this this:
Connection prepared, now switch on the dreambox !
Initiating flash-loader up load…
Uploading flash-loader

After uploading flash-loader, it show this sentence :
No CA found by 2nd stage loader, please contact support at dream-multimedia!

WITH DREAMBOX OPTIFLASHER PRO V1.O.9B
After repairing ET BOOTLOADER it show me this :

Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Connected !
Name: sim201_ssl84b.nfi
FSize: 174832 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
DreamBox Flashed Successfully !

When I check The button WRITE IMAGE/RESTORE BACKUP
It start analyzing and ask me for 192.168.1.77 and after the image
After uploading it show the following : (exemple with “Merlin-3”

Name: Merlin-3-dm800-3-25-ramiMAHER-e3.nfi
FSize: 42405328 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
DreamBox Flashed Successfully !

It stop here and cannot reboot. When I manually unplug and plug it again
It show me “DREAM MULTIMEDIA error! And the light blinking.

I use to correct this problem, but that one, I couldnot since one month, I tried every day.
Please help
DREAMBOX DM 800HD PVR CLONE
LAST IMAGE WITH SSL84B WERE “DOMINICA 9a-dm800-drivers-16.02-sim2-ssl84b-by sat4fun”

Read this post carefully then do it what you read after that let us know about your result..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Thread closed....No follow of the issue