02-08-2017, 11:14 AM
Hi, My name is Mike and I was wondering if someone could help me?
I have the NO CA FOUND error on my DM800HD SE Clone (I think)
I have tried to upload as many photos to explain what I have already tried and where I am getting to...
I'll start off with a bit about what I know about my box...
Front of Box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Rear of Box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
On starting up I get this message
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I hold the mini flashup button when powering on I get this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and then this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and then this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have then tried to flash via web browser by typing in IP address 192.168.1.114 ...I have tried to flash new bootloaders from 76 to 84a/b/d etc. and also new images but when I restart it has no effect.
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I click on device info within web browser Ip address I get this info
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
So, I have since installed optiflasher pro and tried the following, Connected via USB only, write image, write bootloader, repair no CA Found tool. All seem to be successful when installing but when re-starting box still get NO CA FOUND....
Connected via USB and LAN and I get the following IP ADDRESS SHOWN...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have tried several images and bootloaders again but have no luck...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have also tried writing image with 192.168.1.114 in optiflasher with no luck
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I connect via LAN and USB and try to write image I get this...But on the box only shows NO CA FOUND again...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
The most life I've had out of the box is by using NCF tool where I have had the fan up and running and with what seems like a successful flash...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I've even had the clock showing and sleep timer menu so thought I had solved the problem, only to find NO CA again when restarting the box...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Any help would be appreciated,
Thanks,
Mike.
I have the NO CA FOUND error on my DM800HD SE Clone (I think)
I have tried to upload as many photos to explain what I have already tried and where I am getting to...
I'll start off with a bit about what I know about my box...
Front of Box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Rear of Box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
On starting up I get this message
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I hold the mini flashup button when powering on I get this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and then this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and then this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have then tried to flash via web browser by typing in IP address 192.168.1.114 ...I have tried to flash new bootloaders from 76 to 84a/b/d etc. and also new images but when I restart it has no effect.
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I click on device info within web browser Ip address I get this info
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
So, I have since installed optiflasher pro and tried the following, Connected via USB only, write image, write bootloader, repair no CA Found tool. All seem to be successful when installing but when re-starting box still get NO CA FOUND....
Connected via USB and LAN and I get the following IP ADDRESS SHOWN...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have tried several images and bootloaders again but have no luck...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have also tried writing image with 192.168.1.114 in optiflasher with no luck
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If I connect via LAN and USB and try to write image I get this...But on the box only shows NO CA FOUND again...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
The most life I've had out of the box is by using NCF tool where I have had the fan up and running and with what seems like a successful flash...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I've even had the clock showing and sleep timer menu so thought I had solved the problem, only to find NO CA again when restarting the box...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Any help would be appreciated,
Thanks,
Mike.