Hello,
I still get the error no ca found ;-(
Hardware:
Sunray 4 HD se with sim A8P
I read almost everything to fix this error but even the registered Optiflasher Ultimate seems not able to get rid of this error.
I tried al versions of Dreamup, the get stuck at the waiting acknowledge for ip flash.
OptiFlasher Pro Ultimate 2.0.0.9
Only way to get an ip is with JapharFlasher, but when I flash original image (I tried several) after a reboot still the no ca error occurs.
Any help to solve this box would be appreciated !
Thnx
You need to use both cables to gather (mini usb + Rj45) to fix No Ca Found
Read those solved topics
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Fairbird, thank you for helping but unfortunately it doesn't work.
I did read the postings you mentioned but I can't get it to work. Not with usb only, or with usb/serial and lan.
Optiflasher recover the no ca error, start flashing but no ip adress is coming. error no ca stays.
The only way I can get an ip address is with JapharFlasher.
Very weird and time consuming ;-(
Hardware is Sunray SR4 with sim A8P.
If you have another idea please help.
(12-24-2015, 01:34 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Ok..Try this ...
Use JapharFlasher until shown IP address then close JapharFlasher ...
After that open optiflasher and try to flash bootoader or new original image not patched ..
If issue still then trty other pc (win xp better) and other (usb/lan) cables
Hello Fairbird,
I tried all the options you mentioned, without succes.
I can flash with Optiflasher after running Japhar flasher.
But when I shut down and restart the box the same problem occurs ;-)
Strange to me is the fact that I am not able to reset the box after flashing with Optiflasher or Japharflash. Have to make a hard reset.
Any idea?
Thanks.
Then maybe you have hard ware issue ...
Ask our friend (Johnny B)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]