InfoServ

Full Version: dm800 original: Wrong Boot Response!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi,
Original 800hd, disconected sim,
I have tried in L1/L2 modes, the same message appears:

Power ON DB Device [ESC to Abort]
DM800HD Detected !
Wrong Boot Response!

Thanks.
(01-23-2012, 12:25 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.NCF Tool Only for Clone type SIM 2.01/2.10
Use OptiFlasher with "LD1" Option For Original !
Wrong Boot Response mean that there's a problem with SIM try remove it & put it back .

I used OptiFlasher in both modes. The same result. The sim card is glued into the socket. I could only lift it up to disconnect. Kept the sim disconnected for a few minutes. This procedure doesn't help.
I kept disconnected the box from the power and sim from the socket the whole night.
Still see wrong boot response message.
hello,

i have the exaced same error.
did try it all... the both networkled burning don setup even with cacle not attached...

dm800hd detected!
Wrong Boot Response!

greetz Edensan
I had the same error.
fixed with
tried a different pc, and now no error
My dreambox is working again