InfoServ

hi all

DM800HD pvr
clone
Sim 2.01
error!

i try to flash with optiflasher pro with the rs232/usb or lan (advanced mode 1) option
But upload failed at about 90% and get me an error socket :

"
Name: BlackHole.2.1.1.Doscam022.OE.2.0.SIM2.DM800hd.SSL84D.23082014.byMarwen.nfi
Size: 57,78 MB
=================External-Detection-Info=================
NFI: OE1.6-2.6 Detected!
DM800HD Detected!
Smart Check: sim201-ssl84d Detected!
Safe Flash Mode Enabled !
Please Wait ! Do not Disconnect Until Done/Reboot !
OptiFlasher Error: Socket Error # 0
"

and after i have: "error!" on my DM800
when i try to flash in rs232 only (sector recovery), the upload is ok but no flash appears i wait hours and hours nothing happen.
have you an idee?
thanks

If you want to use (sector recovery) option try to flash small image around (45MB) ...
Or try first to flash bootloader with (sector recovery) then try to flash image normally ..

check also your connection..

thanks
my connexion seems to be ok
when i try to flash bootloader with (sector recovery)
the phase 2 begin but never go after just wait....
i will try an small image now

---

so with a smaller image i have : invalid image :

"
Name: DOMICA-9.0a-dm800-sim2-ssl-84b-drhg_24-12-2012.nfi
Size: 44,77 MB
=================External-Detection-Info=================
NFI: OE1.6-2.6 Detected!
DM800HD Detected!
Smart Check: sim201-ssl84b Detected!
Safe Flash Mode Enabled !
Please Wait ! Do not Disconnect Until Done/Reboot !
INVALID IMAGE !"

Try this method also....

[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

with your other method when i try to open telnet myip the window open and close immediatly

and with a smaller image (about 43 mb)
nothing happened
but the images smaller are on lower ssl such as 75 or 76
if my ssl is 84d can i reflash to an older ssl
all images on ssl 84d are biger than 45mb :(

No problem bigger or smaller (I'm just advised to you flash small image)

For old bootloader just flash any bootloader or any image include old bootloader then your box back to old bootloader...

I think you have problem on connection ... Maybe from PC try another pc (win xp) better and try also another RS232 cable or lan cable ..

ok y will try this evening thanks :)

well I don't understand...
i have make test at work with another pc (in win xp )
another lan cable and another rs232 cable
same problems and same errors anytime
is my DM800 out of order? :(

Maybe you have hardware problem ... Maybe from sim maybe from box...

Take it to technician ...

bouuuuuuh ;)
great thanks for your help :) :)