DM800 SE Optiflasher Repair (NO CA FOUND)
Followed instructions with Optiflasher to the T to repair this and gets stuck on 100% on sending flash loader selected Original sim and so on used rs232 selected correct com ports any help would be great please as this is driving me up the wall.
Thank In advance
OS: Windows 7 Ultimate Edition 64-bit
DM800SE V2 Clone A8P Sim
Welcome To OptiFlasher Pro Ultimate Enigma2 EDition!
Join Our Forum/Support at :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
SSL-BT Check Ok!
NFI-DC Module Check Ok!
Ok now I have selected COM3
Advanced Mode 2 With Network Cable Connected I know Box IP Will be 192.168.1.77 an my computer ip 192.168.1.134 so in the network range.
I click On Do Job
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
This is as far as it gets left it for a good 10 mins like this with no success
Ok so I try Advance Mode 1
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Socket Error # 10060
Connection Timed Out
The box Boots but then soon as its restarted have the same issue NO CA FOUND
Ok worked it out took dm800se clone apart removed jumper located under the tuner used latest official release of dreamup and image and bobs ya uncle worked sweet as a nut then got openpli 3.0 beta for original and flashed to box again using dreamup and worked great problem solved.