Dreambox 800HD
Clone
Sim 2.01
Error! + Nothing on LCD
Hi, i have problem with a clone of Dreambox 800HD, with sim 2.01. Error! was on display, and the cause was short circuit on +12V and +5V (I tried to add cooling fan). After that nothing appears on lcd. I tried dreamup but no luck.
What can I do?
Thanks in advance
dreamup shows No-CA by 2nd stage loader,
your DReambox repair tool SIM2 EDition 3.0 shows:
Power ON DB Device [ESC to Abort]
Operation Start at: 15:43:25
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: F9BCFB26
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
NO CA FOUND Repaired Successfully !
Operation Done at: 15:44:49
than with web interface I see this device info:
Product Name ???
Booloader version Dreambox Second Stage Loader BUILD #59, built 20080509
Flash Size 64 MB
Production Date (YYYY/MM/DD) N/A
mID ?
Serial Number ?
MAC Address ?
Printed Serial Number ?
but firmware upgrade doesn't start
and third tool optiflasher:
ower ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: sim201e-75-newnigma2-release-V283-dm800-20100110.nfi
FSize: 42096448 bytes
Authorization id: AC659ABD
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !
but after reboot everything same
If you have shematic for 800hd it would be usefull
Thanks
I fixed the box, sim and LCD are gone, I replaced sim and box working again, moderator can close the topic with solved