Hi, my dm800se with sim A8P on display appers ...bios no ca found... I´m to try with Optiflasher by no sucess. on job maintain busy during several times and the following with program open(Power ON DB Device [ESC to Abort]). Please I will request any help stop I received my dm with simcard A8P incorporated.
Regards
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Hi mr fairbird, tks a lot stop for your information I try all the three (showthread), but unable to fix the problems on my dm800se with sim A8P, that appears at display "bios no ca found"; I tried several times with all cables using the optiflasher but negative. Could you give any solution stop
regards
You sin is A8P as like as original sim...So you need to select (LD2) loader and this is not free must be make donation to get pro key for optiflasher then you can select LD2....
Also see this video...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Hi, for your info I make ten euros for donate at last sunday(02.Feb.2014) and received a licence for key; and when I select "LD2" and "Job", I see always on program "busy" and nothing else;Please could you advice if able another donation in order to obtain the special key to active this video operation and how many!!!!; What`s guaranty I have certain that this problem wiil be solved??? I wait any reply stop tks, regards
Check your port, maybe busy with some tools or programers, Also check your antivirus maybe blocking optiflasher ....
Hello mr. fairbird...
after so earnestly, I solved the problem "bios no ca found -DM800SE A8P" to the following programs: Optiflasher pro, NCF SIM2-v 2.5 and dreamup v1.3.3.9- in Serial mode with Ip-192.1xx.x.xx placed on internet browser and then sent the following image: OpenPLi-2.0 and dm800se working now at 100%. Connect: mini usb cable and Lan Network port 3, so you can close the thread. Tks a lot for your last message, regards