InfoServ

Hi everybody,

i checked on the other posts but didn't find a solution for me.

I've a sunray sr4 48p, i installed a firmware openpli and didn't work, then i used sunray-flushup and i was able to start openpli (i think that was a boot load problem) but when i switched off and on again i got the same error, then i tried install nemesis E1.6.

Now i still have NO CA FOUND but not work like before, i tried use dreambox optiflasher ,ncf sim2 e sunrasy flashup but no way.

I'm only able to get an ip address (192.168.1.77) but doesn't work, not ping, not telnet and not http, nothing.

The only try i did't do is with null modem cable i worked only with USB and windows driver

I'm very frustrated....can someone help me

We want to see your sim ...Can you make two photos from both side of sim ?

Of course fairbird

Do you think that if i try with serial-usb cable instead usb cable i'll solve something?

You sim A8P as like original sim So you can flash only original image with original bootloader..
So follow this topic and read it carefully
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Hi guys,

i made one step ahead, now i can surf to the default ip address 192.168.1.77 and i'm able to see the firmware upload page, i use an old version of IE and i tried to upload many images, my sim is A8P and after the main image, before reboot the decoder, i installed a second stage but nothing changed, what kind of second stage i have to use?

The strange thing is that my friend told me to use a 2.10 ssl 84 because with my same box works, i tried to install the 2.10 ssl84 and on the front display i see the yellow loading bar.

Is possible that my sim A8p is an 2.10?
The other tools like dreamup and sunray flash doesn't recognize my box, i can only use optiflasher

Of Course No....Don't flash any bootloader (secondstage) for any different sim...
You have (A8P) So only flash original bootloader
1-download here last SSl84
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-flash to box SSl84 then after finish Turn off box
3-Now flash any original image (NOT PATCHED IMAGES)
4-Turn off Box then Turn on