InfoServ

Hello @ all

I have for the first time now absolutely no idea what i can do anymore

I have a DM800se with SIM210
Sadly i "flashed" NN2 image with the latest DreamUP 1.3.3.11 and at the point flashing from its memory it wont go anymore further so i disconnected and shut down the box

and this is where the problem starts
now i can't flash anything anymore
SunrayFlashUP is connecting but stops at "upload completed waiting for acknowdledge" i cant flash any SSL or Image cause the flash image button is not showing up

Optiflasher i tried both baudrates and the flasher is Sending also flash loader but then nothing happens anymore

i also tried recover bad sectors but i guess i am not comming that far

i just want to 100% if this box is dead so i can forget it

thx in advance

this is the complete bootlog

(11-26-2013, 01:20 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.If your box is out of warranty then please confirm first that your sim is 2.10
by opening the box & read the label writen on sim & try to remove it & put it back .
After that try to use Repair No ca Found from OptiFlasher using Advanced Mode 2
then post the log of your operation

Yes no warranty anymore sadly
i am 100% sure it's 2.10 the box is completly opened i removed the tuner and HDD to try flash but it does not help
i cleaned the SIM and the pins with Isoproply

i tried your advise but it ends with the same result
Sending flash loader...until 100% ( it goes fast)

then nothing happens

(11-26-2013, 01:34 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.DreamUp V1.3.3.11 have no patched version for clone so from the begin
is a mistake using this !
Is your problem appear only after flashing NewEnigma2 image that caused this problem ?

exactly

my dm worked fine on NN2 3.3.2 but i wanted to update
i took original dreamup flashed NN2 4.0.5 lean by rami maher
and now box wont boot at all

i think my box is seriously broken -.-

maybe first bootloader is broken if thats possible

Hi,

I do have exact the same problem. Did you manage to resolve this problem?

I can't flash a second time, I then get wrong boot response. If I wait more yhan 15 minute, I can flash with the same result: Sending flash loader .....

I already tried another sim2.10, same problem.

Tx

Bart

Log after second time power on (via putty com4):

BCM74130011
012
K1
K2

K3

K4

K5

Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=00000010
RC2=00000017
WC2=00000034
RC3=0000000D
WC3=FFFFFFE2
RC4=0000000D
WC4=00000035
NWC=0000000B
RC5=00000005
WC5=0000000B
RC6=00000017
WC6=0000000B
NRC=0000000E
RW=00000013
WW=00000054
G=00000000 R=0000000E W=0000000B
BL=00000000
RC1=00000003
RC2=00000014

BL=00000001
RC1=00000004
RC2=00000014

BL=00000002
RC1=00000004
RC2=00000013

BL=00000003
RC1=00000005
RC2=00000014

BL=00000004
RC1=00000005
RC2=00000014

BL=00000005
RC1=00000005
RC2=00000016

BL=00000006
RC1=00000004
RC2=00000014

BL=00000007
RC1=00000006
RC2=00000016
3
COPY CODE
COMPARE CODE