Hi,
I flashed a wrong image to the dreambox of my friend, assuming that he had sim2 inside. Now I have NO CA found problem. I took a look at the sim. I did not see that before. It is a white card with WT00 8993 written on it. I think that it is a sim1 card.
Can anyone help me with that? Which ssl is needed, or does someone has an image with the ssl inside?
Thanks.
Post here two photos to both side from sim>>>
(09-05-2013, 12:16 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.Post here two photos to both side from sim>>>
Here are the pictures of the sim. I tried several images and also ssl69, which I downloaded from this site, but when I try to flash with dreamup, it says: calculating checksum and doesn't do anything more.
[
attachment=474][
attachment=475]
Seems like Sim1 (T3)...and this sim you can load only old image with old bootloader until ssl70 or maybe ssl72 only...
so you can flash
Bootloader (seconStage) 69 or 70 or maybe 72 (only)..
Try with optiflasher ... (Repair [No Ca Found])
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-Select Loader LD1 (For sim1/2)
2-Select no ca found
3-chosse sim1/sim2
4-choose bootloader (Dm800-Sim1-ssl70)
Then if box boot again then try to search old image with old bootloader only
(09-05-2013, 12:39 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-Select Loader LD1 (For sim1/2)
2-Select no ca found
3-chosse sim1/sim2
4-choose bootloader (Dm800-Sim1-ssl70)
Then if box boot again then try to search old image with old bootloader only
Thank you Fairbird,
I found ssl70 for Sim1 and it worked. The problem is solved now. Thanks again for the support.