OptiFlasher 2.0.0.4
SUNRAY4HD se
Clone
Sim A8P (China)
No Ca Found After Flash image
I did as instructed but I get this info :
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
I/O error 6
EInOutError
help please
Thank you
Read this post and follow (1-Null modem cable only without Network lan)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
P.s: Should by to select loader (LD2) for genuine sim and A8P sim, but you need to make donation to get pro key for optiflasher because LD2 option not free ...
I have the pro key for optiflasher and I used LD2.......see PrintScreen
I Can't see any things..
Did your box recognized with optiflasher or not? if not try another mini usb+lan cable and another pc (win Xp better)
P.s:You have D800se, should by to use both cables to gather (mini usb+Lan)
Also Check back to box do you have small button (mini flash button), If your box have it just press and hold then open power to box and Keep holding on button until to see IP on front small screen panel then put Ip in browser and flash new image...
You're not looking at the picture printscren? There is an answer to your questions.Dreambox recognized with optiflasher.
"P.s:You have D800se, should by to use both cables to gather (mini usb+Lan)"
Yes, I have used.
"Also Check back to box do you have small button (mini flash button), If your box have it just press and hold then open power to box and Keep holding on button until to see IP on front small screen panel then put Ip in browser and flash new image..."
Yes, I have used.
Without success, you see the error in the printscreen......
I solved using DreamUp1339-all OK
Thanks for your time, you can close ...
I'm sorry my English