InfoServ

Full Version: no ca found--wrong boot response please help
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
hi

i had dreambox 800 hd with no ca found
i mange to get the boot which is 82 from hyperterminal
i open the box and the sim is 201
i tried optiflasher and NCF repair tool and i get
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Wrong Boot Response!

please help me

note: i also tried patched dream up

note : i tried sector recover same
DM800HD Detected !
Wrong Boot Response
Read this topic and Follow "Fix Bad Sector "Null modem cable only without Network lan"
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-select com (If doesn't connect try to change Baudrate between 57600 & 115200)
2-select Loader [LD1] For sim2
3-click settings and choose "sectors recover"
4-select [Repair No Ca Found] and choose DM800-sim2.01-ssl84b
5-click "Do job" and turn on power to box then wait to connect with box and repair the problem.
Same problem
Please more explain, Does optiflasher flashed image succeed and shown to you finished with "recovered sectors"?
: i tried sector recover
DM800HD Detected !
Wrong Boot Response
Don't forget to select Loader LD1 for sim2 and choose right bootloader for your sim
I did all of that it always give that wrong boot response
Then i think...one from two..
1-Your sim is not sim2.01 (make sure about sim)
2-Sim not in Correct place (open box remove sim return it back and make sure in correct place)
thanks for your response
Still dead
I return the box to the shop
So Closed Thread...