DM800HD
Clone
Sim2.01
No ca found after image flash
please help me i have tried using the NCF tool and it suceeds but afterwards i dont no what to do. I have tried going on the web interface and flashing but that doesnt work and i have tried using dreamup but i still get NO CA FOUND errors. I have also tried using optiflasher
Please Help as i am starting to panic
Thanks
Also- when i am able to get into the web interface, if a try to flash an image the flash button doesnt work :'(
Read this thred..and use "Flashing by Null modem cable only without Network lan" method
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-open optiflasher as administrate.
2-and use that method "Advanced mode 2"
3-Choose "Repair [No Ca Found]
4-Select "DM800-sim2.01-ssl84a or SSl84b"
5-Click "Do job"
(11-01-2012, 04:16 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-open optiflasher as administrate.
2-and use that method "Advanced mode 2"
3-Choose "Repair [No Ca Found]
4-Select "DM800-sim2.01-ssl84a or SSl84b"
5-Click "Do job"
Thanks I'll give that a go when I get home although I think I've tried that already. If that succeeds, what should I do next? Pull the power on the dreambox and then power it on while holding silver button
thanks
(11-01-2012, 04:16 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-open optiflasher as administrate.
2-and use that method "Advanced mode 2"
3-Choose "Repair [No Ca Found]
4-Select "DM800-sim2.01-ssl84a or SSl84b"
5-Click "Do job"
I tried it. Follew the instructions carefully and when optiflasher finished i wasnt sure what to do, so i pulled the power and tried to boot while holding the power button and i still got no ca found :'( any other ideas?
So try again and use "Flashing by Null modem cable only without Network lan" method
but now try to flash this image with cable exactly as in the tutorial..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
after install image just turn off box and turn on without holding the power button..
(11-01-2012, 07:27 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
after install image just turn off box and turn on without holding the power button..
Ok so i unplugged everything from my dreambox, connected a null modem directly to my pc, used optiflasher on advanced 2 mode to repair 'no ca found' selecting ssl84b, than i pulled the power, i then flashed the recommended image i opiflasher again in advanced 2 mode. i then pulled the power and also removed the null modem. I then powered it up again, but i still get 'no ca found' Any more suggests would be helpful
THanks
In this case i think your sim isn't sim2.01..make sure what kind of your sim