[epernoli]

0

    Hello to all forum, my name is enrico. I read your forum and it's great. Very compliment for all work and support. I have a dm800hd pvr max hd and send for error a second stage wrong. After, I try with serial cable null modem and dream up, but no solve it. I m not sure of version of sim. I find on internet same image of sim. I tried with optiflasher, and says me all ok message, and when finish says Ok repair no ca found, but when restart dm800 i receive same message. err01 no: no ca found. I try all, and now i'm crazy. Please help me. Thanks for all, enrico

[epernoli]

0

thanks for you answer. I try use DreamBox-OptiFlasher-Pro-E2-v2.0.0.6. The really problem is that i don't now, what is the sim and image to sould. Can help me?

[epernoli]

0

Thank a lot, I make all you says, but when restart dreambox, i have alays err01 no ca found
This is the image:    

Than you so much

[fairbird]

0

Make sure what kind of sim you have? Then you can can flash correct SSlxx

[epernoli]

0

Hello, the sim I have is identical to the one I posted. however I have tried all. thank you, I don't know how solve the problem. If I try to send firmware on advanced mode 2, only serial i think, and i disconnect dm800, when start dm800 on display i see.... booting.....and on display see channell, if restart decoder, same problem

[fairbird]

0

Follow this topic...do it exactly what I have wrote in it..
follow (Repair [No Ca Found]) steps
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
And you can find ferrari sim images from image section or from ferrari official forum
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] or from NFIDC (Nand Flash image Download Center):
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

P.s: to fix No Ca Found use only null cable Rs232 without network cable